SNMP Settings

In the SNMP section of the Programmeinstellungen, you can configure settings which affect the SNMP function operation.

Use SNMP WinAPI

Enable this option if you are getting errors or the program is hanging while it performs the SNMP operations (getting the data from managed switches, monitoring SNMP values). This setting allows the program to use the WinAPI functions for communicating via the SNMP protocol, but these functions not always work correctly in the process of the multi-threaded background monitoring.

Convert SNMP trap value OIDs to names

SNMP trap messages sent by network devices to the program usually contain the OID codes as value names (zum Beispiel, 1.3.6.1.2.1.1.3.0=10). This is not comfortable for understanding the message meaning. Das Programm kann convert the digital codes to more plain value names using the MIB tree (zum Beispiel, .iso.org.dod.internet.mgmt.mib-2.system.sysUpTime=10).

Replace text in SNMP traps

As in the previous option, das Programm kann replace value names to any strings which can be defined in the table below. Our example value name 1.3.6.1.2.1.1.3.0 can be automatically replaced to "Uptime:".

SNMPv3 accounts

Sie können configure the SNMPv3 authorization accounts in the list located under the option.

Response timeout (ms)

Sie können change the response timeout for all the SNMP functions here.